One Cut & Finish - P6.01

Koch-Chemie One Cut & Finish P6.01 — the innovative one-step polish for permanent removal of polishing haze, holograms, scratches and sanding from grit P2000, with a simultaneous sealing effect. Homogeneous abrasives give a brilliant, durable high-gloss finish, and the optimal ratio of abrasiveness to gloss is what makes it economical for vehicle preparation. Correction, gloss and protection in one pass.

• Grinding level 6.0 / Gloss level 8.0
• Removes polishing haze, holograms, scratches and P2000 sanding marks
• Contains carnauba wax and non-volatile silicones — that's the sealing effect
• Economical, easy to polish and easy to wipe off
• One-step route to a corrected, protected, high-gloss finish

Shake before using. Work with a One Cut Pad on a high-performance eccentric (min. 15mm stroke) or an eccentric with forced rotation. Spread five pea-sized drops evenly on the pad, distribute over the surface with the machine at its lowest speed, then polish crosswise at medium pressure. Don't alternate these pads with other products. Available in 250 mL and 1L.

Handling: check suitability and compatibility before use. Don't use on hot surfaces. Protect against frost and excessive heat.