Gelcoat Micro Cut & Finish

Koch-Chemie Gelcoat Micro Cut & Finish — a fine-cut finishing polish with built-in protection for lightly weathered and dull gelcoat and boat paint. Special abrasives permanently remove polishing haze, holograms and fine scratches, leaving a durable high gloss even on dark colours in harsh light. Carnauba wax seals as you polish, so there's no separate sealing step.

• Fine cut and protection in one step
• Removes haze, holograms and fine scratches
• Carnauba wax seal — no separate sealant needed
• High gloss even on dark colours in harsh light
• For dual-action (eccentric) polishers

Shake well. Use a DA polisher with a hard micro-cut pad. Apply 5 pea-sized drops, spread at low speed, then work crosswise at the highest speed. Buff off residue with a clean microfiber. Available in 1L.

Read this before you use it. Contains silicone. DA polishers only. Not for unpainted plastics or rubber. Never use on hot surfaces. Protect from frost and heat.