Gelcoat Micro Cut

Koch-Chemie Gelcoat Micro Cut — a fine-cut marine polish for lightly weathered and dull gelcoat and boat paint. It mechanically removes polishing haze, holograms and fine scratches rather than filling them, so what you see is real correction. Economical, easy to work and easy to wipe off — the ideal refining step before sealing.

• Fine cut for light weathering and dull gelcoat
• Removes holograms, haze and fine scratches — no fillers
• Economical, easy to work and wipe off
• Ideal refining step after heavier compounds
• For dual-action (eccentric) polishers

Shake well. Use a DA polisher with a hard micro-cut pad. Apply 5 pea-sized drops, spread at low speed, then work crosswise at the highest speed. Wipe off residue with a microfiber, then seal with Gelcoat Finish, Marine Protective Sealant or Ceramic Boat Hull. Available in 1L.

Read this before you use it. Sealing afterward is required. DA polishers only. Not for unpainted plastics or rubber. Never use on hot surfaces. Protect from frost and heat.